Polished nickel Flora lavatory set with two-wing handles

Flora by Fantini: the handle that shows a new profile from each side of the room

Fantini

Vincent Van Duysen

Flora
Flora An icon of Italian design
$ 5,738

Prefer a tailored configuration?

Trade terms for professionals and design studios

Walk the length of a vanity fitted with Flora and the handle will not look the same twice. Fantini puts it in one sentence: the particular cross-section of the handle offers an unexpected image depending on the viewpoint and the perspective. From the mirror it is one drawing, from the doorway another, from the tub a third. Vincent Van Duysen designed it three times over, to carry one “wing”, two or four, and Fantini treats that small part as the signature of the whole collection: tactile, ergonomic, never quite still.

That is a lot to ask of designer faucets, which mostly get judged straight on, from a catalog page. At the lavatory Flora comes three ways. A three-hole set flanks the spout with two handles; a single-hole faucet folds the controls into one soft-lined body; a wall-mount version clears the deck entirely. Underneath is brass, finished in Mokka, Chrome, Brushed Steel Look, Polished Nickel or Matt Gun Metal, and the finish carries across every element, down to the drain. In an executive and guest bathroom, where people stand at the sink for a minute and look around, a fitting that rewards a second glance earns its place.

Past the lavatory, the line follows what the water is for. To shower: concealed valves and thermostatic mixers, round showerheads on an arm or set flush into the ceiling, a handheld spray in its holder. To soak: tub fillers built into the wall, mounted on the deck or rising from the floor. For the bidet, a single-hole mixer. To cook: a kitchen faucet whose spout swivels, with a pull-out spray beside it. To rinse off by the pool: Flora Outdoor, a stainless steel shower column. La Mercanti brings the finish into the room’s own light before the specification is fixed.

Technical information based on data declared by the manufacturer.
  • Type: designer faucets for bath and kitchen, a collection covering lavatory, bidet, shower, tub and sink
  • Manufacturer: Fratelli Fantini Spa of Pella (Novara), on Lake Orta in Italy
  • Design: Vincent Van Duysen
  • Base material: brass
  • Finishes: Chrome (02), Polished Nickel PVD (95), Matt Gun Metal PVD (P5), Mokka PVD (S5), Brushed Steel Look PVD (92)
  • Handles: one-wing, two-wing and four-wing styles, listed as .1, .2 and .4; each faucet ships with its handles
  • Three-hole lavatory faucet: spout flanked by a pair of handles in style .1, .2 or .4; reach of 5.5 in or 5.9 in; ceramic valves opening in a 90° quarter turn; flexible supply lines; ordered with drain, or without when the code ends in W
  • Wall-mount lavatory faucet: three-hole layout, any handle style; ceramic valves, 90°; spout reach 5.9 in or 7.9 in; 1/2″ inlets; trim and rough-in valve carry separate codes
  • Single-hole lavatory faucet: one .1 handle on a traditional cartridge; 4.9 in reach; flexible lines; drain optional
  • Wall single-control, loose spouts: single-control wall faucet, .1 handle, spout in either wall-mount reach on its own rough-in body; a deck valve that pairs with stand-alone lavatory spouts for deck or wall
  • Flow, lavatory and bidet: restricted to 1.3 gpm at 43.5 psi across the range
  • Drilling and deck: 1.38 in holes; three-hole sets on 3.9 in centers; deck no thicker than 1.6 in under a three-hole set, 2 in under a single-hole
  • Bidet: single-hole, .1 handle, reach matching the single-hole lavatory faucet, swivel aerator; bidet sprayer, supplied with its stop valve, on a 47 in hose of brass
  • Concealed shower valve: traditional cartridge, .1 handle; one outlet, or two or three through a rotary diverter that mounts horizontally only; inlets of one-half inch; rough-in body declared soundproofed
  • Thermostatic shower valve: 1/2″ model on escutcheons, diverting to 2 outlets, for vertical mounting; 3/4″ model whose rotary diverter also shuts off, fitted horizontally with whichever of the three handles; 3/4″ push-button model (ON/OFF), built as one plate or as individual stop valves; Easy Fix System available as an option
  • Showerheads: 7.9 in brass head, 3.2 gpm at 43.5 psi; 11.8 in Acquafit head, stainless steel, 240 nozzles with limescale protection, 3.7 gpm, with a ceiling-recessed option; a 3.1 in wall head that swivels
  • Shower arms: for the wall, 11.8, 13.8, 15.7 or 17.7 in long; for the ceiling, 3.9 or 9.8 in; flange is round; drywall prep optional
  • Hand shower kit: hand shower made of brass, 2.4 gpm, limescale protection; wall outlet with holder; 59 in hose; round flange 2.3 in or 2.8 in across; adjustable body spray
  • Tub: in-wall valve whose spout version adds a 2-way diverter, built single-control or two-handle; spoutless in-wall valve; deck-mount sets, 5-hole including the spout and 4-hole when there is none; floor-mount single-control tub filler that brings its hand shower and holder; wall spouts; hand shower hose as listed above
  • Kitchen: 4-hole sink faucet with a handle pair in .1, .2 or .4 style; the spout swivels and reaches 8.5 in; the spray pulls out of its own hole, has one jet and an on/off button; 2.1 gpm limiter; deck limit equal to the three-hole lavatory set; 3-hole single-control version
  • Exterior version: the shower column named Flora Outdoor; base material AISI 316L stainless steel; for use outdoors and indoors; concealed valve on a progressive cartridge; optional hand shower worked by a push button; Brushed stainless steel or Black Velvet finish
  • Coordinated extras: 1″1/4 drains, push-open or free-flowing; bottle trap; pair of filter stops; flush plates fitting Geberit Sigma 8 and Sigma 12, and TECE (Tecebox Octa II); tub drain column with filler
  • Origin: Made in Italy
La Mercanti USA Llc — your partner for Italian design and contract supply.
Los Angeles, CA, USA · +1 855 335 8079 · info@lamercanti.us
Supply, quotes, specifications and project support across the United States and North America.

Let us know which finishes you'd like to explore

$ 180

Credited in full toward your purchase

FAQ

At what flow rate do Flora lavatory and bidet faucets run?

1.3 gpm at 43.5 psi. Every Flora lavatory and bidet faucet leaves Fantini with a flow restrictor set to that figure. It is the maker’s declared value; what a local code requires is checked on the project against the manufacturer’s documentation.

How far does the wall-mount Flora lavatory spout reach?

You can order it at 5.9 in or 7.9 in. Which one is right depends on the sink, so the choice is made with the sink’s cut sheet on the table and before the rough-in goes into the wall.

Which way do you turn the rotary diverter to shut the shower off?

Back to center. The 3/4″ thermostatic valves have a diverter that rests closed in the middle: turn it right and the first outlet opens, bring it back to center and the water stops, turn it left and the second and then the third outlet open in sequence.

Is there a floor-mounted tub filler in the Flora line?

Yes. It is a single-control filler with a .1 handle and a spout reaching 7.9 in and stands on its own foot. One control opens and closes the water and adjusts both flow and temperature, and a hand shower with its own holder is included.

What does Fantini say about the Mokka finish?

That the Mokka tone “wraps spaces with warmth and naturalness”. It is one of the PVD finishes of the collection and, like the others, it is applied to every element, so a Mokka lavatory faucet can sit in a room with Mokka shower trim and a Mokka tub filler.

How to plan a Flora kitchen faucet around its four holes

In the kitchen Flora is a faucet in several parts, so the countertop has to be drilled for it. Five steps to settle before the fabricator cuts the stone.

Count four holes for Flora

The two-handle Flora kitchen faucet needs four holes in the countertop: one for the swivel spout, two for the handles, one for the pull-out spray, which is a separate piece. Mark all four on the fabricator’s template.

Check the countertop thickness

Fantini lists a maximum deck thickness of 1.6 in for the kitchen faucet. Measure the finished countertop, build-up included, where the holes will go; a mitered edge can look thicker than the slab actually is.

Choose two controls or one

With two handles you get ceramic valves that open in a 90° turn and a choice among the three Flora handle styles. The alternative is a three-hole, single-control version on a traditional cartridge, with an identical spout and spray.

Give the spout its swing

The spout swivels and reaches 8.5 in over the sink. Check that arc against the sink drawing before the holes are cut.

Place the pull-out spray

The spray is a single-jet piece with an on/off button, and it pulls out of its own hole. Set it on the side of the hand that will use it. The faucet is limited to 2.1 gpm at 43.5 psi.