Rust epoxy-coated steel frame and cable tray under the Monolith desk top

Monolith executive desk for offices that hire designers on purpose

Las Mobili

Orlandini Design

Executive desk only
Monolith Most chosen configuration Executive desk only
$ 11,947

Prefer a tailored configuration?

Bespoke: size, colour, finish

Most executive desks tell visitors the company has a facilities budget. Monolith by Las Mobili, designed by Orlandini Design, tells them the company has a point of view. The geometry does the talking: a thin top with shaped edges floating on V-shaped legs cut from 4 mm steel plate, the whole frame coated in Rust, Terracotta or Black. It is the executive desk equivalent of good architecture — nothing added to impress, everything placed to work.

The top options run from a single 3d-foil surface in six finishes to a marble-effect ceramic in White Calacatta or Black Desirè — 6 mm of ceramic bonded to the wood core, so the desk carries the stone look at furniture weight and takes daily use without ceremony. Versions with an inset writing zone in eco-leather or contrasting 3d-foil give founders and managing partners the one luxury that photographs poorly and works daily: a defined place to think on paper.

Built for the room, not just the desk

Cables climb inside the V-legs through built-in risers and collect in a steel tray under the top — the back of the desk looks as resolved as the front, which matters when the office sits behind glass. Service units act as structural supports or freestanding storage; columns and low cabinets extend the finish language into a full executive floor. La Mercanti supplies Monolith direct from the factory in Italy, with white-glove delivery and installation.

Technical information based on data declared by the manufacturer.

Collection: Monolith
Manufacturer: Las Mobili
Design: Orlandini Design
Category: executive desk / executive office system

Top versions:
Single 3d-foil top
Single marble-effect ceramic top (approx. 0.24 in ceramic bonded to the wood core)
Top with 3d-foil insert: Grey Elm 12, Black 56 or Grey Beige 83
Top with eco-leather insert: Black or Mud

Wooden tops:
Two coupled 18 mm (0.7 in) MDF panels, shaped perimeter edges
3d-foil visible face, melamine counter-facing
Finishes: Grey Elm 12, Bali Walnut 30, Slate 55, Black 56, Wenge 60, Grey Beige 83
Optional top-access cut-out with soft-closing flip-top; bilateral opening on meeting tables

Ceramic surfaces:
White Calacatta over Grey Beige 83, or Black Desirè over Black 56

Metal structure:
Rectangular steel frame 50 x 25 mm (approx. 2 x 1 in), 0.06 in gauge
Press-folded steel cable tray
V-shaped legs in 4 mm (approx. 5/32 in) sheet steel with built-in cable risers
Epoxy powder finish: Rust, Terracotta, Black

Service units:
Structural support for the top or freestanding
Push-open doors, drawers on metal guides with nylon bearings, stop and self-closing
Interiors in melamine-faced board, Black 59 or Stone Grey 44; folding open inserts in 3d-foil
Height-adjustable nylon feet

Storage:
Columns and low cabinets W 71–94.5 in (180–240 cm), composable or freestanding
Reversible push-open doors; 110° hinges with 3D adjustment, titanium-coloured on black structures, nickel-plated on stone grey
Concealed shelf hardware, 1.3 in pitch; modular units with open inserts

Modesty panels (optional):
Two shapes, W 35.4–49 in x H 21.7 in, 3d-foil on sheet steel in the frame colours

Coffee tables:
3d-foil or ceramic tops on V-shaped legs, Rust, Terracotta or Black

Warranty declared by the manufacturer:
5 years on the furniture
3 years on worktops faced with 3d-foil
2 years on sockets, cables, control panels and motor drives
Spare parts available for 5 years

Manufacturer certifications: UNI EN ISO 9001:2015 (SQ174159-ICILA), UNI EN ISO 14001:2015 (ICILA-SGA-17258), UNI ISO 45001:2018 (IMQ-SHS-170062), SA8000:2014 (certificate no. 144), FSC® chain of custody ICILA-COC-000170 with FSC® certified products on request, COSMOB Qualitas Praemium Formaldehyde no. 45/2025 for low-formaldehyde panels; declared contribution of 6 LEED points (MR C4 recycled content, MR C2 construction waste management, MR C5 regional materials, EQ C4.5 low-emitting materials)

La Mercanti USA Llc — your partner for Italian design and contract supply.
Los Angeles, CA, USA · +1 855 335 8079 · info@lamercanti.us
Supply, quotes, specifications and project support across the United States and North America.

When it is the right choice

  • Corner offices where the desk should read as architecture: thin top on V-shaped 4 mm steel legs, cable riser built into the leg.
  • Rooms where the desk works as the meeting table: 0.24 in marble-effect ceramic bonded to the core, White Calacatta or Black Desirè.
  • Warm-material interiors: frame powder-coated in Rust or Terracotta, or Black for corporate palettes.

When another solution fits better

Let us know which finishes you'd like to explore

$ 180

Credited in full toward your purchase

FAQ

Our client wants an executive office that doesn't feel corporate. Is Monolith the right call?

That is exactly the brief Monolith answers. Traditional executive desks communicate through mass — heavy tops, closed volumes. Monolith communicates through drawing: exposed V-leg geometry, a thin shaped top, and a Rust or Terracotta frame that reads more gallery than boardroom. It carries authority the way good architecture does, which is why it suits founders, creative practices and professional firms whose clients are design-literate.

How does the ceramic top hold up to actual daily use — coffee, keys, lunches at the desk?

Better than any wood-based surface. The marble-effect ceramic is a fired surface bonded to the wood core: heat, moisture rings and everyday scratches are not events. That is why we steer clients toward ceramic when the desk doubles as a meeting table. One honest caveat — it is ceramic with a marble look, not quarried stone, and we always specify it that way. For most working offices that is the advantage, not the compromise.

Can Monolith be configured like an L-shaped desk?

The Monolith way to get there is the service unit: specified as a structural support it carries one side of the top and adds drawers and push-open storage at working height — the function of a return, resolved as architecture rather than an attached wing. Columns and low cabinets behind the desk complete the composition. Send us the floor plan and we return a dimensioned layout with the configuration mapped to your room.

What arrives with the desk for our FF&E documentation?

A component-level bill of materials with Las Mobili product codes, dimensioned drawings, 3D models from the manufacturer's download area, and the product certifications available among the downloadable documents on this page. Project-specific requirements — emissions data, environmental criteria for a LEED-tracking fitout — are confirmed project by project before order, so your spec book and the delivered product match.

How do we justify Monolith against a mid-market executive desk at half the price?

Look at where the money visibly went: 4 mm steel plate legs with cable risers inside, a ceramic surface that will not need replacing after the first hard year, hinges with 3D adjustment, drawers on self-closing metal guides. A mid-market desk shows its price in year three — edges, sag, cable clutter. Monolith is specified once, and the executive office it anchors stops being a recurring line item. That is the argument a procurement committee actually accepts.

How to build a design-forward executive office around Monolith

Five decisions for A&D teams and design-literate clients: palette first, top second, storage as architecture, cables resolved, samples in the room.

Set the room's temperature before choosing anything

Monolith's frame colours are a design decision, not a trim option. Black steel recedes — right for glass towers and neutral floors. Rust and Terracotta commit the room to a warm, architectural palette that pairs with timber, brick and plaster. Decide which conversation the office wants to have, because every later choice — top, storage fronts, even the guest chairs — follows the metal.

Choose the top by how the desk is actually used

Ceramic (White Calacatta or Black Desirè) where the desk hosts meetings, coffee and daily wear — it is the surface that forgives everything. Single 3d-foil in six finishes where the room wants warmth and quiet. The eco-leather or 3d-foil insert versions define a writing zone for executives who work on paper. If the desk faces the door, remember the visitor sees the top before the person behind it.

Treat storage as part of the architecture, not an afterthought

The service unit can structurally support the top — storage and desk become one drawn object. Behind, columns and low cabinets (up to 94.5 in wide) in the same 3d-foil finishes handle the archive and the video-call background. Open inserts in contrasting foil break up closed fronts. Specify the whole wall with the desk, not after it: the finish codes are shared, and the room reads as one decision.

Resolve power before the desk is oriented

Cable risers live inside the V-legs and a steel tray runs under the top, so the desk manages its own wiring — but the building still has to deliver power to one leg. Mark the floor box on the plan, orient a riser leg to meet it, and add the flip-top top-access at order stage. Done in this sequence, the executive office has no visible cable from any seat in the room.

Judge the finishes in the actual room

Calacatta ceramic, Rust steel and Bali Walnut foil each shift character between showroom light and your client's actual window line. We ship physical samples to the studio or the site; the sample cost is credited in full against a confirmed order. Ten minutes with samples in the room prevents the one mistake this category does not forgive — a palette chosen from a screen.

You May Also Like