Let's discuss your project
Trade terms for professionals and design studios
The modern meeting fails quietly, one dead battery at a time. The Cross Office version answers with declared hardware: a rectangular top with a fixed opening carrying three power and data units, a cable duct finished in white or black, and a leg equipped for cable routing — so power arrives at the surface without a single wire crossing the floor. The leg position is defined at order stage, flush with the edge or set back 23.6 inches (60 cm), letting the electrification follow the room's plan rather than fight it.
The system around it, designed by Milanese studio Metrica in 2014, keeps the same discipline: two heights — 29.1 and 41.3 inches (74 and 105 cm), the taller electrified version carrying one unit — tops in white or black Fenix® laminate or oak and wengé veneer, and in-line configurations for rooms that grow. Boardroom, collaborative work, conference rooms, training spaces and the home office share one architecture. For US projects, La Mercanti configures power, height and finish room by room, with delivery times confirmed in writing at order confirmation.
Collection: Cross, meeting and work table system
Manufacturer: Arper (Monastier di Treviso, Italy)
Design: Metrica, 2014
Declared heights: 29.1 in (74 cm) and 41.3 in (105 cm) — the taller version ideal as a meeting or working table
H 74 version: rectangular top in Fenix® laminate or oak veneer stained natural or wengé; legs matching the top, flush with the edge or set 17.7/23.6 in (45/60 cm) from it according to top size
H 105 version: Fenix® laminate top; coated steel legs, 35.4 in (90 cm) wide, flush or set 17.7 in from the edge
Cross Office h 74 (electrified): top with fixed opening, three power and data units, cable duct in white or black, leg equipped for cables; leg position defined upon ordering (flush or 23.6 in)
Cross Office h 105 (electrified): one power and data unit with cable duct; legs flush or at 17.7 in
In-line configurations: several Cross tables joined via the dedicated connection leg, using tops of equal depth and thickness; a pair of legs closes the ends
Span: up to nearly 13 feet (about four meters), made possible by modern die-cast aluminum (manufacturer's declaration)
Top finishes: Fenix® white, Fenix® black, wengé (h 74 only), natural oak (h 74 only)
Declared care: tops with a soft damp cloth and diluted neutral detergent, always dried; no bleach, abrasives or metal scourers; wood with neutral soap and circular movements; coated metals rinsed carefully and dried with a shammy cloth, polish not recommended; when in doubt, test on a hidden area and wait 24 hours
Normative reference: EN 15372 (non-domestic tables) — Level 1 light (hotel bedrooms, churches, libraries), Level 2 general (hotels, bars, restaurants, public halls, banks, meeting rooms), Level 3 severe (transport terminals, public hospital areas, barracks)
Precautions: periodically check the tightening of connecting fastenings
End of life: separate components by material to ease recycling
Note: top dimensions are confirmed on the manufacturer's documentation at order stage
Let us know which finishes you'd like to explore
Five steps that turn installation day into a checklist — not a negotiation in the freight elevator.
