From our design team in Italy — within 24 hours
Trade terms for professionals and design studios
From our design team in Italy — within 24 hours
Trade terms for professionals and design studios
Every piece of Gessi 316 is stainless steel, down to the towel bar and the robe hook: the catalog names AISI 316 and AISI 316L for the entire collection, and AISI 316 for its two sinks. Gessi has long relied on that same steel for its Private Wellness® shower program; here it extends it to stainless steel designer faucets for every room that takes water.
The catalog adds a point for anyone who weighs materials. Under its “Design for nature” heading, the steel is 100% recyclable and can be regenerated and recycled endlessly, and Gessi calls it a durable material with high aesthetic value. In a corner-office powder room, one metal throughout means faucet, towel bar and sink go on a single line of the spec. Gessi lists CORE: New York among its projects with this collection.
Gessi produces it in Serravalle Sesia and follows the water outlet by outlet. At the lavatory: single-handle faucets, standard or tall, wall-mount, and spouts from the deck, ceiling or floor. At the bidet, a matching mixer. At the tub: deck sets, a floor-mount filler and a spout from the wall. In the shower: valves, thermostatics, ceiling systems and showerheads. At the kitchen sink, three faucets and one that dispenses filtered water; then accessories and the two sinks. La Mercanti sits down with the client over the plan and takes every water outlet in turn.
Let us know which finishes you'd like to explore
So the faucet can be finished to taste. According to the catalog, the handle kit holds two levers of different lengths, and the choice between them sets the look of the faucet. The shorter one stays close to the cylinder; the longer one reads as a gesture across the vanity. Since both come in the kit, La Mercanti leaves the decision to the people who will use the room.
Two, depending on the spout: the catalog lists the tall single-handle faucet with a reach of 4.8 or 7.6 inches in every version, with slightly different figures for Tornita. On a vessel sink, measure from the faucet base to the center of the bowl before choosing; as a rule of thumb, the longer reach belongs with the wider bowl.
Yes. Some of the ceiling and wall shower systems come with COLOUR chromotherapy, which the catalog describes as switchable off at will. The same systems offer rain, cascade and mist functions and pair with high-flow thermostatic valves for three, four or five ways. The colored light is therefore an option to use when wanted, not a permanent feature of the room.
Through the surface. The catalog speaks of giving a material seen as technical and cold an unprecedented warmth and a furnishing quality of its own: textures and patterns on the body, handles and spouts that can be varied, and finishes, which Gessi says give the metal a unique warmth. For a designer, the faucet can then be chosen like a piece of furniture, by pattern and by color.
Across a wide range of settings: Gessi describes it as suited to contexts from public to residential, and to yachting as well. For an office project that is a practical point. The same line can run from the restrooms visitors use to the private bath beside the corner office, so the specification stays consistent from floor to floor and room to room.
Gessi 316 lets the spout and the control stand apart, at the lavatory and at the tub. Five steps, from where the hand meets the control to a spout hung from the ceiling or standing on the floor.
In the Gessi 316 catalog, Gessi pairs several lavatory spouts with a separate control, so the lever no longer has to stand behind the spout. Decide first where on the vanity the hand should find it, then let the spout take the best position over the bowl.
The deck spouts come in two heights, 6.4 or 9.1 inches, with a reach of about 6.1 or 7.6 inches. As a rule of thumb, the taller one is the natural partner of a vessel sink and the lower one of a basin set into the counter. Draw both on the elevation before choosing.
The lavatory spout can also hang from the ceiling, in a custom length anywhere from 2 to 70.9 inches. The length is counted from the ceiling down to the point where the water should leave the spout, so the ceiling build-up and the basin height have to be fixed before ordering.
For a freestanding basin there is a floor-mount spout 39.5 inches tall with a reach of 7.6 inches, again worked by a separate control. The supply comes up through the floor, which means its position has to be set while the subfloor is still open.
The same logic works at the tub: a wall spout with a reach of 7.4 inches, operated by a separate control. The rim stays clear, the control goes where it is easy to reach from inside or outside the tub, and the wall behind takes only the spout.